geo-marine ? connectors e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2003 glenair, inc. printed in u.s.a. cage code 06324 www.glenair.com 13 220-04 and 220-14 connector receptacle assemblies rear mounted jam nut wall mount recommended panel cutout master key e master key indicator f direction of pressure capability - class h g c thread .50 (12.7) max panel accommodation 220-04: 1.62 (41.1) 220-14: 2.07 (52.6) .59 (15.0) d jam nut piston o-ring a thread .16 (4.1) ref. b thread flange o-ring dimensions shell size 10 12 14 16 18 20 22 24 g .005 (0.1) .835 (21.2) .960 (24.4) 1.085 (27.6) 1.210 (30.7) 1.335 (33.9) 1.460 (37.1) 1.585 (40.3) 1.710 (43.4) f dia .005 (0.1) .885 (22.5) 1.010 (25.7) 1.135 (28.8) 1.260 (32.0) 1.385 (35.2) 1.510 (38.4) 1.635 (41.5) 1.760 (44.7) e flats 1.125 (28.6) 1.250 (31.8) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) d dia 1.25 (31.8) 1.38 (35.1) 1.50 (38.1) 1.63 (41.4) 1.75 (44.5) 1.88 (47.8) 2.00 (50.8) 2.12 (53.8) c thread class 2a 7/8 - 20 unef 1 - 20 unef 1 1/8 - 16 un 1 1/4 - 16 un 1 3/8 - 16 un 1 1/2 - 16 un 1 5/8 - 16 un 1 3/4 - 16 un b thread class 2a .750- .1p - .1l .875- .1p - .1l 1.000- .1p - .1l 1.125- .1p - .1l 1.250- .1p - .1l 1.375- .1p - .1l 1.500- .1p - .1l 1.625- .1p - .1l a thread class 2a 5/8 - 24 unef 3/4 - 20 unef 7/8 - 20 unef 1 - 20 unef 1 1/8 - 16 un 1 1/4 - 16 un 1 3/8 - 16 un 1 1/2 - 16 un shell size 10 12 14 16 18 20 22 24 recommended jam nut installation torque values 95 110 140 170 195 215 235 260 10.73 12.43 15.82 19.21 22.03 24.29 26.55 29.38 inch-pounds newton-meters torque 5% replacement o-ring part numbers * piston o-ring 2-014 2-016 2-018 2-020 2-022 2-024 2-026 2-028 shell size 10 12 14 16 18 20 22 24 * parker o-ring part numbers. compound n674-70 or equivalent. flange o-ring 2-021 2-023 2-025 2-027 2-029 2-030 2-031 2-032 series no. shell style 04 = standard 14 = scoop proof class h = hermetic e = environmental 220- 04 h 24- 61 p n polarization (n, 1, 2, 3, 4) p = pins s = sockets (class e only) insert arrangement shell size prior to use, lubricate o-rings with high grade silicone lubricant (moly-kote m55 or equivalent). metric dimensions (mm) are indicated in parentheses.
|
